Sundown Engineering began in March 1994 with one person operating from double garage at our home. We have grown to a staff of 5 with a fully equipped workshop covering a wide variety of fabrication and repairs located at 145 Edith Street, Innisfail.

WE FABRICATE A VARIETY OF ITEMS:

• Aluminium Ute Trays
• Aluminium and Stainless Steel Tool Boxes
• Aluminium and Stainless Steel Tanks
• Aluminium and Steel Ute Canopies
• Aluminium and Steel Side Protection Bars
• Aluminium Boat Repairs
• Boat Canopies, Bow Rails, Transoms and Pods
• Rod Holders, Bait Boards and Anchor Wells
• Mandrel Bent Side Protection Rails
• Off Road Galvanized Boat Trailers
• Aluminium Boat Trailers
• Stainless Steel Bench Tops and Splash Backs
• Stainless Steel Wire Rope Balustrading
• Stainless Steel Grab Rails
• Aluminium Balustrading
• Stainless Steel Walk Way Rails Commercial Applications
• CNC Profile Cutting – can cut any design from Stainless, Aluminium or Steel
• CNC Timber Routering/Engraving
• CNC Machining Threads, Bushes, etc
• ALL TYPES OF ALUMINIUM AND STAINLESS STEEL FABRICATION

• Digital Pulse Tig & Mig Welders
• 125 ton Brake Press
  • press material thickness up to 8mm
  • material width 4 metres
  • CNC controlled for accuracy
  • segmented top and bottom tooling
  • full length multi ‘V’ die and goose neck top punch
• Plasma Cutter
• Band Saw, Drop Saw, Cold Saw
• Variable Rack Guillotine
  • cut materials up to 8mm thick
  • cutting width up to 3.2 metres
  • one metre DRO back guage
• Radial Arm Drill for large capacity drilling
• Centre Lathe
  • general turning and machining
  • bushes, threads, pins etc
• 60 Ton Punch and Shear
  • shears up to 300 x 20mm thick plate
  • shears up to 100x100x13 angle
  • shears up to 40mm solid bar
  • will punch up to 40mm diameter hole
• CNC Vertical Machining Center
  • cuts slots, holes, facing and boring etc.
  • stainless, aluminium or steel materials
  • travel is 1050mm x 500mm
• Hot Metal Spraying
• Various Equipment for the Polishing of Stainless Steel, Aluminium, Brass etc.
• CNC Water Jet/Profile Cutter and Engraver
  • plasma cutting up to 20mm thick
  • Water Jet cuts a variety of materials
  • bed size 1500mm x 4500mm
  • timber, alloy and stainless engraving
• Mandrel Tube Bending
  • stainless steel, aluminium and mild steel
  • sizes: 32mm up to 76mm (with some sizes excluded)
• Conventional Compression Bending with Hydraulic Bender
  • sizes: 19mm up to 65mm
• Rolling – Sheet, Flat, Box and Channel

We can fabricate whatever you require. From custom made tool boxes and tanks to box trailers, tool trailers and off road boat trailers. Aluminium Ute Trays, Fully Enclosed Canopies, removable canopies, fuel tanks etc. Scroll down for pictures.

Our CNC Profile Cutter can plasma cut Stainless Steel, Steel and Aluminium to a thickness of 20mm,  and Water Jet cut thicker and a wide variety of materials including glass, timber, foam and plastic. We used the machine to cut out the children’s figures at the Cairns ‘Muddies’ Playground and the Stainless Steel lettering of Innisfail Brothers Leagues Club.

This one CNC machine can Engrave, Plasma Cut and Water Jet Cut. The machine bed size is 1500mm wide and 4500mm long. The possibilities are endless.

We also have a Router on the same CNC Machine. We can engrave timber signs, aluminium and stainless steel on a larger scale than a trophy.

Below are various examples of what we can do. Feel free to make an enquiry via the contacts page should you have any questions. Or give us a call!

We fabricate Aluminium and Stainless Steel Canopies.

Tinny casting platforms, seats, side pockets, anchor wells, anchor drum winches, fishing winches, pods, transom modifications, electric motor mounts, floors and repairing leaks and damage.

Custom made aluminium boat trailers and off road hot dipped galvanized boat trailers.